1/2" Galvanized Pneumatic Tool Rings - 10,000 per box

3/4" Galvanized Pneumatic Tool Rings - 10,000 per box

1/2" Stainless Steel Pneumatic Tool Rings - 10,000 per box

3/4" Stainless Steel Pneumatic Tool Rings - 10,000 per box

Galvanized net rings (pictured right) for the battery-operated net ring tool. 10,000 rings per box.

Stainless steel net rings for the battery-operated net ring tool. 10,000 rings per box.

Galvanized net rings, coated in black PVC, for the battery-operated net ring tool. Ideal for low visibility applications. 10,000 rings per box.

Use small turnbuckle for cable runs under 25’, medium turnbuckle for runs 25’ to 75’, and large turnbuckle for runs over 75’.

10 Small Galvanized Turnbuckles - for use with Galvanized Cable.

10 Medium Galvanized Turnbuckles - for use with Galvanized Cable.

10 Large Galvanized Turnbuckles - for use with Galvanized Cable.

10 Small Stainless Steel Turnbuckles - for use with Stainless Steel Cable.

10 Medium Stainless Steel Turnbuckles - for use with Stainless Steel Cable.

10 Large Stainless Steel Turnbuckles - for use with Stainless Steel Cable.

These high quality ferrules are designed for 5/64" cable. Aluminum for galvanized cable and copper for stainless steel. Two ferrules should be used per cable loop attachment.

100 1mm Copper Ferrules

Heavy duty copper ferrules for use on oversized or extra-heavy applications. If heavy forces from wind or snow are anticipated this heavy duty hardware should be considered.

For use with 5/64" cable.  Use Aluminum ferrules for all galvanized products and copper for stainless steel.  Two ferrules should be used per cable loop attachment.

250-ft Galvanized Steel Cable

500-ft Galvanized Steel Cable

Our 5/64" diameter 7x7 construction cable is the standard for perimeter suppport. It is available in galvanized or stainless steel. Stainless steel is recommended for installations near heavy moisture, chemical environs or salt-laden air.

500-ft Stainless Steel Cable

Heavy duty 5/32 cable for oversized or extra-heavy applications. Great for use where high wind and snow may be expected.

Heavy duty 5/32 STAINLESS STEEL cable for oversized or extra-heavy applications. Great for use where high wind and snow may be expected.

10 Stainless Steel Eybolts

Corner/end attachment for an I-beam or other thick metal.

20 Galvanized Eyebolts

For steel up to 2" thick. Bolt on an I-beam or flat steel and attach your cable or turnbuckle directly to it.

10 SS Girder Clamps

Your best bet for larger net installations, this clamp can hold up to 630 pounds of tensioned weight. Bolt to an I-beam or other steel structure and run your cable inside the jaws. Opens up to 2".

4 Heavy Duty Steel Clamps

This high-load bearing expansion bolt is the perfect anchor for most masonry, stone or concrete corner/end attachments. Use the smaller M6 for cable runs under 100’ and the larger M8 for runs over 100’

10 Galvanized M6 Netbolts

10 Stainless Steel M6 Netbolts

10 Galvanized M8 Netbolts

Corner attachment for smaller net jobs (under 15 feet). Drill an 8mm hole, insert the bolt and turn the eye for a solid hold.

10 Galvanized Mini Netbolts

10 Stainless Steel Mini Netbolts

Ideal for cable ends and corners when attaching in wood.

50 Galvanized HD Screw Eyes

20 Stainless Steel HD Screw Eyes

Used to secure cable loops in lieu of ferrules. Two clamps are recommended per termination; use three on long, heavy runs of cable. 10 per pack.

10 Galvanized Cable Clamps

10 Stainless Steel Cable Clamps

One of the strongest and most discreet intermediate attachment systems available for stone, masonry or brick. Insert the Anchor Rivet into a pre-drilled hole and hammer the Stainless Steel Split Pin home. Thread the cable through the hole in the split pin

100 1.5" Anchor Rivets

100 1" Split Pins

100 1.5" Split Pins

This versatile, stainless steel bracket can be used as an end or intermediate attachment, and installed as either a permanent fixture or as a quick release cable holder.

100 Cable Brackets

Makes attaching to steel or concrete a snap. Just load the pin in the gun and fire.

100 Cable Brackets with Hilti Pin

This strong, hammer-on clip allows you to attach cable to hard-to-drill surfaces. Hammer the clip onto the edge of an I-Beam with the cable running through the jaws (not through the hole), and your cable is secure.

100 3/32"-9/64" Galvanized Girder

100 1/8" - 1/4" Galvanized Girder Clips

100 5/16" - 1/2" Galvanized Girder Clips

100 9/16" - 3/4" Galvanized Girder Clips

Constructed of high quality, zinc-plated steel, the Hilti Loop is an easy to use attachment for stone, concrete and brick. Drill a hole and hammer it home. Open option for removable nets.

100 CLOSED Loops

100 OPEN Loops - Pictured on right

Stucco is one of the most challenging substrates for bird control. This durable plastic attachment affords a solid base for the screw eye. Drill a 3/8" hole, insert the Kwik Tog so it expands behind the stucco.

50 Kwik Togs

Screw directly into wood, or use with an anchor for masonry.

100 Small Stainless Steel Screws

100 Plastic Anchors for lag screws.

100 Large Galvanized Screws

100 Small Galvanized Screw Eyes

20 Small Stainless Steel Screw Eyes

This hammer-in attachment can be used in stone, concrete or solid brick. Does not require a plastic anchor sleeve, the bent shaft holds it securely in place. Zinc coated.

100 Net Spikes

Ideal way to hold cable down to tiles. This stainless steel fastener slides under Spanish tile, or screws under composite tiles. Twist head for cable to run in other directions.

10 Roof Tile Clips

Sel-adhering velcro pads for small net jobs where drilling is not an option. Clean and prep the surface thoroughly before installing.

100 Black Net Anchors

100 Stone Colored Net Anchors

Great for small jobs, this stainless steel clip attaches netting to a structure without running cable. NOT RECOMMENDED for jobs over 5’ x 5’.

100 Clips

Low profile, stainless steel intermediate attachment for wood or sheet metal. Secure with self-tapping screw.

100 Net Loops

Use for invisible seams and to make minor repairs.

500-foot Black Net Twine

500-foot Stone Net Twine

500-foot Translucent Net Twine

Stainless steel net clips join pieces of netting to allow for removal of panel for access. New, thin design is very hard to see.

100 3/4" Clips

100 2" Net Access Clips

Zippers can be net-ringed into the netting to create any sort of an opening. Heavy duty marine construction insures long-life.

1-foot Black Zipper

3-foot Black Zipper

6-foot Black Zipper

Custom Cut Black Zipper. Simply enter lenght of zipper you want.

Options:
Size Enter Zipper Length

1-foot Stone Zipper

3-foot Stone Zipper

6-foot Stone Zipper

Custom Cut Stone Zipper. Simply enter lenght of zipper you want.

Options:
Size Enter Zipper Length

1-foot White Zipper

3-foot White Zipper

6-foot White Zipper

Custom Cut White Zipper. Simply enter lenght of zipper you want.

Options:
Size Enter Zipper Length

Protective neoprene pads for use with the telescoping poles, to prevent damage to the roof surface.

Telescoping poles can be used to build raised netting systems. The poles can be used to keep the center cable higher (like a tent), or to raise a whole net system above a flat roof, or a roof covered with HVAC equipment.

24" Cable Stand-off for Bird Barrier’s HVAC Net System.

48" Cable Stand-off for Bird Barrier’s HVAC Net System.

Weighted cable for use with the Bird Barrier HVAC Net System.

Hilti's powder-actuated tolls are powered by easy-to-use shot cartridges. Simply insert the cartridge up through the bottom of the tool, and they are in place and ready to go. Bird Barrier carries the heavy charge (red) because the tool is adjustable and can be backed down to much less power if necessary.

10 Hilti Cartridges

Used to fasten Bird Barrier brackets and clips to different metals.  Small screw uses 1/4" nut driver; large screw uses 5/16" nut driver.

100 Small Stainless Steel Self Tapping Screws.